UC知道我进入不了windows了, 怎样设置从光驱启动?很老的机了.
来源：百度知道 编辑：UC知道 时间：2024/09/28 06:50:36
按del后就进入这些: Main advanced power boot exit
MAIN下:
System time
System date
Legacy diskette a
Legacy diskette b [None]
Floppy 3 mode support [disabled]
有disabled enabled两个供选择
Primary master [Disabled]
Primary slave [Maxtor 6e040l0]
Secondary master [Auto]
Secondary slave [ATAPI-CD ROM-DRIVE-52MA]
Key board features [ON]
advanced 下:
Current cpu internal frequency 566 hz
Cpu internal frequency [Manual]
Cpu frequency multiple [8.5x]
Fsb/sdram freq (mhz) [66/66]
Cpu level 1cache [enabled]
Cpu level 2cache [enabled]
Cpu level 2cache ecc check
Bios update [enabled]
Ps/2 mouse function control [Auto]
Usb legacy support [Auto]
Os/2 onboard memory> 64m [disabled]
Chip configuration
i/o d
MAIN下:
System time
System date
Legacy diskette a
Legacy diskette b [None]
Floppy 3 mode support [disabled]
有disabled enabled两个供选择
Primary master [Disabled]
Primary slave [Maxtor 6e040l0]
Secondary master [Auto]
Secondary slave [ATAPI-CD ROM-DRIVE-52MA]
Key board features [ON]
advanced 下:
Current cpu internal frequency 566 hz
Cpu internal frequency [Manual]
Cpu frequency multiple [8.5x]
Fsb/sdram freq (mhz) [66/66]
Cpu level 1cache [enabled]
Cpu level 2cache [enabled]
Cpu level 2cache ecc check
Bios update [enabled]
Ps/2 mouse function control [Auto]
Usb legacy support [Auto]
Os/2 onboard memory> 64m [disabled]
Chip configuration
i/o d
在BOOT选单下把1、2、4三项都设为“disabled”即关闭这三项，只留第3的CD-ROM，这样保存后再试试睇能不能用从光盘启动。（再说一下，在我的经验中出现过多次同一张光盘在别人的机可用，但到我的机就用不了，或者反过来）