谁谁能帮我翻译一篇文章啊 英语翻译成汉语啊

来源:百度知道 编辑:UC知道 时间:2024/07/02 19:55:10
2[ Dynamic model] tilt circuit and vehicle planar dynamics
Dynamic model of the tilt circuit is developed from an input!output relations point
of view[ The input is the spool position of the tilt circuit valve[ The outputs are "0#
M[ Cobo et al[:Mechatronics 7 "0887# 752774 760
bucket angular velocity due to tilt cylinder displacement\ and "1# planar motion "x\
y\ u# of the vehicle[
The following assumptions and approximations are made for the model]
"0# Lift circuit is stationary at a nominal lift angle[ Therefore\ we expect to obtain
di}erent tilt circuit models for di}erent nominal lift circuit positions[
"1# Vehicle is modeled as a mass!spring!damper system in 1!D space which has three
degrees of freedom] x\ y\ u[ This is a fairly good approximation since vehicle body
and tires act like a mass!spring!damper system[
"2# Hose volume and hydraulic losses are included

2 [动态模型]倾斜电路和车辆的平面动态
动态模型倾斜的电路是由发达国家的投入!输出关系点
观点[投入是阀芯的立场倾斜电路阀[产出“ 0 #
米[斯科博等人[ :机电一体化7 “ 0887 #七五二七七四七六〇
斗角速度由于倾斜缸位移\和“ 1 #平面运动的” X \
y \ u #该车辆的[
以下的假设和近似作出了示范]
“ 0 #电梯电路是固定在一个名义升降机角[因此, \我们期望获得
邸) erent倾斜电路模型为邸) erent名义电梯电路的立场[
“ 1 #车辆模型作为一个群众!春天!阻尼系统在1 !三维空间,其中有3个
自由度] × \ y \ u [这是一个相当不错的逼近,因为车身
和轮胎的行为像一个地下!春天!阻尼系统[
“ 2 #软管的数量和水力损失都包括在水工模型[
“ 3 #电!液压阀的动态是,包括作为一个二阶_lter与九[ 696
阻尼比[这是一贯的与行为的实际电子商务: H的阀门使用
在wtl车辆[
“ 4 # e : H的阀阀芯区”所谓的计量#是不是直线职能阀芯的立场[
后台打印领域是准确的几何模型作为一个非线性函数阀芯
立场[
“ 5 #标准ori_ce方程是用来描述之间的关系〜怎么
率“问#和后台的立场, ”因此,计量方面的# \和压力,迪) erential \
民主党[
戚cpx1
r
aizdpi
“ 6 #的灵活性,由于石油压缩是考虑到由于体积弹性模量的
液压〜的UID [
投入!产出之间的关系阀芯的地位和桶形角速度是
获得3个阶段: “图[ 7 #逼近]
“ 0 #稳定状态投入!输出功能之间的阀芯位移和倾斜缸
速度是所谓的倾斜调制[此模型捕捉非线性静
关系包括几何死和阀!缸增益[预告
e ) ective死和增益的功能, “ 0 # 〜低利率”这是一个功能
发动机转速在wtl案件#