UC知道linux目标机网络
来源：百度知道 编辑：UC知道 时间：2024/09/21 08:07:55
打开ARM2410目标机，接上网线，打开超级终端，设置目标机IP，ifconfig eth0 59.69.73.90 （主机上网的IP是59.69.73.94），然后在超级终端里面的操作和显示如下，请问这是什么问题？
[/mnt/yaffs]ifconfig eth0 59.69.73.90
[/mnt/yaffs]ping 59.69.73.94
PING 59.69.73.94 (59.69.73.94): 56 data bytes
NETDEV WATCHDOG: eth0: transmit timed out
NETDEV WATCHDOG: eth0: transmit timed out
NETDEV WATCHDOG: eth0: transmit timed out
NETDEV WATCHDOG: eth0: transmit timed out
--- 59.69.73.94 ping statistics ---
9 packets transmitted, 0 packets received, 100% packet loss
在虚拟机linux下的操作也是这样，主机ping目标机就是destination unreachable，高手请指点下！！！
[/mnt/yaffs]ifconfig eth0 59.69.73.90
[/mnt/yaffs]ping 59.69.73.94
PING 59.69.73.94 (59.69.73.94): 56 data bytes
NETDEV WATCHDOG: eth0: transmit timed out
NETDEV WATCHDOG: eth0: transmit timed out
NETDEV WATCHDOG: eth0: transmit timed out
NETDEV WATCHDOG: eth0: transmit timed out
--- 59.69.73.94 ping statistics ---
9 packets transmitted, 0 packets received, 100% packet loss
在虚拟机linux下的操作也是这样，主机ping目标机就是destination unreachable，高手请指点下！！！
如果你是主机后边接出来的线，不是用网线，要用交叉线
还是IP问题，看网关，路由设置，目标机ip绑定的参数是否正确，或于上位机是否同处相同的域。如果软件设置都正确看网线打法和连接是否正确