UC知道进入war3选择地图时,出现蓝屏0x0000008E怎解决
来源：百度知道 编辑：UC知道 时间：2024/08/20 22:04:21
A problem has benn detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've sen this stop eeror screen.
restart your computer.If this screen appears again,fllow those steps:
check to be sure you hace adequate disk space,If a driver is identified in the stop message,disable ,the drive or check with the manufacturer for driver updates.
Try changing video adapetrs.
Check with your hardware vendor for any BIOS updates.Disable Bios memory options such ad caching or shadowing.If you need to use safe Mode to remove or disable components,restart your computer,press F8 to select Advanced startup options,and then select Safe Mode
Technical information:
****stop:0x0000008E(0x80000004,0x806EDAE1,0XA9A32818,0X00000000)
Beginning dump of physical memory
Physical memory dump complete
Contace your system administrator or technicalsupport group for further
assistance
非常感谢各位大哥的关注。
<
If this is the first time you've sen this stop eeror screen.
restart your computer.If this screen appears again,fllow those steps:
check to be sure you hace adequate disk space,If a driver is identified in the stop message,disable ,the drive or check with the manufacturer for driver updates.
Try changing video adapetrs.
Check with your hardware vendor for any BIOS updates.Disable Bios memory options such ad caching or shadowing.If you need to use safe Mode to remove or disable components,restart your computer,press F8 to select Advanced startup options,and then select Safe Mode
Technical information:
****stop:0x0000008E(0x80000004,0x806EDAE1,0XA9A32818,0X00000000)
Beginning dump of physical memory
Physical memory dump complete
Contace your system administrator or technicalsupport group for further
assistance
非常感谢各位大哥的关注。
<
你把内存条拔下插实了，然后开机应该不蓝屏了，但是你要把系统的补丁打上，还有杀毒，一般此类蓝屏是病毒或是系统漏洞或是内存条损坏造成的
你一定是装了七彩虹的vga smart把它卸了然后重装驱动
0x0000008E:KERNEL_MODE_EXCEPTION_NOT_HANDLED
◆错误分析:内核级应用程序产生了错误, 但Windows错误处理器没有捕获. 通常是硬件兼容性错误.
◇解决方案:升级驱动程序或升级BIOS.
内存拔出擦拭后重新插入 如果是多条内存 可以分条来检测
还是不行就重装驱动吧 驱动肯定有问题了