UC知道电脑蓝屏，请高手指教
来源：百度知道 编辑：UC知道 时间：2024/07/02 01:56:37
我开机时蓝屏，显示A problem has been detected and windows has been shut down to prevent damage to your computer
If this is the first time you’ve seen this seop error screen, restart your computer.If this screen appears again, follow these steps：
The BIOS in this system is not fally ACPI comliant。 Please contact your system vendor or visit http://www.Hardware－update.com for an updated BIOS。If youu unable to obtain an updated BIOS or the latest BIOS supplied by your vendor is not ACPI compliant. You can tarm off ACPI mode daring text install storage drivers. The system will not notify you that the F7 key was pressed---it will silently disable ACPI and allow you to continae you installation.
Thchnical information：
***STOP:0X000000a5(0X00010007，0X000000fC，0X00000000，0X00000000)
关机时也蓝屏显示STOP:0X0000008E(0XC0000005 0X80541886 0X1392738FC 0X0000000000)
那位大侠能教我怎么做啊。请指教啊！在次先谢过
If this is the first time you’ve seen this seop error screen, restart your computer.If this screen appears again, follow these steps：
The BIOS in this system is not fally ACPI comliant。 Please contact your system vendor or visit http://www.Hardware－update.com for an updated BIOS。If youu unable to obtain an updated BIOS or the latest BIOS supplied by your vendor is not ACPI compliant. You can tarm off ACPI mode daring text install storage drivers. The system will not notify you that the F7 key was pressed---it will silently disable ACPI and allow you to continae you installation.
Thchnical information：
***STOP:0X000000a5(0X00010007，0X000000fC，0X00000000，0X00000000)
关机时也蓝屏显示STOP:0X0000008E(0XC0000005 0X80541886 0X1392738FC 0X0000000000)
那位大侠能教我怎么做啊。请指教啊！在次先谢过
0x0000008E:KERNEL_MODE_EXCEPTION_NOT_HANDLED
◆错误分析:内核级应用程序产生了错误, 但Windows错误处理器没有捕获. 通常是硬件兼容性错误.
◇解决方案:升级驱动程序或升级BIOS.拿掉显卡清洁干净、换内存槽位子。
0X000000a5 那你的内存条重新插下
cmos需要升级！恢复下BIOSS设置看看！
你的很可能是硬件的问题 把内存的显卡拆下来 把金手指用橡皮擦擦 内存换个插槽插上 试试吧
进系统做一下内存诊断，在附件系统工具里，如果是内存问题，他会出提示。如果不是内存问题，一个就硬件驱动问题，建议安装最新驱动 。
└—┘0x0000008E:KERNEL_MODE_EXCEPTION_NOT_HANDLED
◆错误分析:内核级应用程序产生了错误, 但Windows错误处理器没有捕获. 通常是硬件兼容性错误.
◇解决方案:升级驱动程序或升级BIOS.