UC知道电脑起机后蓝屏
来源：百度知道 编辑：UC知道 时间：2024/09/21 08:07:31
a problem has been detected and windows has been shut down to prevent damage to your computer.
if this is the first time you've seen this stop error screen,
restart your computer.if this screen appears again,follow these steps:
check to be sure you have adequate disk space.if a driver is identified in the stop message,disable the the driver or check with the manufacturer for driver updates.try changing video adapters.
check wtih your hardware vendor for any BIOS updates.Disable BIOS memory options such as caching or shadowing.if you need to use safe mode to remove or disable components,restart your computer,press F8 to select advanced startup options,and then select safe mode.
technical infor mation:
*** stop: 0x0000008E(0xc0000005,0x4c076935,0xA1B4O428,0x00000000)
系统刚启完，桌面都显示完图标之后两三秒，就蓝屏勒。
上面是蓝屏后显示的东东，重启之后就不会了。
过一段时间后开机又来。
不知道上面有没有字母打错，我是按手机照下来的图片打的。。
不知道是啥鸟问题，各位大虾帮忙哈。
if this is the first time you've seen this stop error screen,
restart your computer.if this screen appears again,follow these steps:
check to be sure you have adequate disk space.if a driver is identified in the stop message,disable the the driver or check with the manufacturer for driver updates.try changing video adapters.
check wtih your hardware vendor for any BIOS updates.Disable BIOS memory options such as caching or shadowing.if you need to use safe mode to remove or disable components,restart your computer,press F8 to select advanced startup options,and then select safe mode.
technical infor mation:
*** stop: 0x0000008E(0xc0000005,0x4c076935,0xA1B4O428,0x00000000)
系统刚启完，桌面都显示完图标之后两三秒，就蓝屏勒。
上面是蓝屏后显示的东东，重启之后就不会了。
过一段时间后开机又来。
不知道上面有没有字母打错，我是按手机照下来的图片打的。。
不知道是啥鸟问题，各位大虾帮忙哈。
0x0000008E:KERNEL_MODE_EXCEPTION_NOT_HANDLED
◆错误分析:内核级应用程序产生了错误, 但Windows错误处理器没有捕获. 通常是硬件兼容性错误.
◇解决方案:升级驱动程序或升级BIOS.
0x0000008E:
错误分析:内核级应用程序产生了错误, 但Windows错误处理器没有捕获. 通常是硬件兼容性错误.
解决方案:
1、检查内存是否插紧，质量是否有问题或不兼容。
2、更改、升级显卡、声卡、网卡驱动程序。
3、如果是windowsXP系统，请安装sp2补丁 如果是windows2000系统，请安装sp4补丁。
4、杀毒。
把硬件从主板插槽上拔下来再重插，插牢点。
可能最大就是内存的问题了哈。要委换个试试？或者是你重新装一下系统。。
去买重装盘…按F8进安全模式安