UC知道求助，电脑蓝屏了，只能看懂部分信息，请大家帮助一下
来源：百度知道 编辑：UC知道 时间：2024/07/12 11:14:31
蓝屏信息如下：
a problem has been detected and windows has been shut down to prevent damage to your computer
if this is the first time you've seen this stop error screen, restart your computer .if this screen appears again, follow these steps
check to be sure you have adequate disk spale.if a drver si identified in thstop message disable the driver or check with the manufacturer for dviver updates.try changing video adapters.
check with your hardware vendor for any BIOS updates. disable BIOS memory options suck as caching or shadowing. if you need to use safe mode toremove or disable components,restart your computer press F8 to select advanced startup options and then select safe mode.
Technical information:
*** stop: 0×0000008E (0×C0000005,0×BF82DDCB,0×F88D3E20,0×00000000)
*** win32k .sys - addvess BF82DDCB base at BF800000,datestamp 43446a58
a problem has been detected and windows has been shut down to prevent damage to your computer
if this is the first time you've seen this stop error screen, restart your computer .if this screen appears again, follow these steps
check to be sure you have adequate disk spale.if a drver si identified in thstop message disable the driver or check with the manufacturer for dviver updates.try changing video adapters.
check with your hardware vendor for any BIOS updates. disable BIOS memory options suck as caching or shadowing. if you need to use safe mode toremove or disable components,restart your computer press F8 to select advanced startup options and then select safe mode.
Technical information:
*** stop: 0×0000008E (0×C0000005,0×BF82DDCB,0×F88D3E20,0×00000000)
*** win32k .sys - addvess BF82DDCB base at BF800000,datestamp 43446a58
0x0000008E:KERNEL_MODE_EXCEPTION_NOT_HANDLED
◆错误分析:内核级应用程序产生了错误, 但Windows错误处理器没有捕获. 通常是硬件兼容性错误.
◇解决方案:升级所有驱动程序或升级BIOS.
我的电脑也出过，是IBM的机器，到现在不知道是什么毛病，通电就是蓝的
通常都是内存或硬盘出了问题,换一换也许就好了.
发现问题，而且计算机已经停工以避免对你的计算机造成伤害
如果你是第一次已经看到这一个停止错误的屏幕 ，重启你的计算机。如果这一个屏幕再一次出现, 遵从这些步骤
假如驱动不能进行或者机器不能自检,检查确定你是否有足够的磁盘空间
检查你的硬件设施,以保证你的BIOS更新。是BIOS 记忆选项失去能力例如贮藏或遮蔽吸。如果你使用安全的模态 或使默写功能失去能力, 重启你的计算机按 F8 选择启动首选项然后选择安全的模态。
技术上的数据:
***停止:0 × 0000008 E(0 × C0000005 ， 0 × BF82DDCB ， 0 × F88D3E20,0 × 00000000)
*** win32k.在 BF800000 的 sys- addvess BF82DDCB 基础,datestamp 43446 a58
我不会，只能大致翻译一下
看看内存有没有故障，再重装系统试试。