UC知道每次重起后就是蓝屏,怎么办
来源：百度知道 编辑：UC知道 时间：2024/07/04 13:37:54
用黄山修复 了下IE,提示需要重新起动.重新启动后就进入蓝屏,已经重起过很多次都是进入蓝屏.
本人使用操作系统windows 2000 PROFESSION .机子已经用了4年左右,没有换过硬件.能进入安全模式.
蓝屏出现提示信息如下:
*** stop:0x0000007f (0x00000008,0x00000000,0x00000000,0x00000000)
unexpected_kernel_mode_trap.
if this is the first time you've seen this stop error screen,restart your computer. if this screen appears again,follow these steps:
run a system diagnostic utility supplide by your hardware manufacturer .in particular,run a momory check,and check for faulty or mismatched memory.try changing video adapters.
disable or remove any newly installed hardware an dricers. disable or remove any newly installed software. if you need to use sage node to remove or disable components,restart your computer,pressF8 to select advanced stratup options ,snd then select soft mode.
refer to your geeting started manucal foe more information on tuoubles hooting shop errors.
请各位高手帮忙,急需要答案.由于光驱坏了,重装系统很是麻烦的.
内存条冲插,还是蓝屏
BIOS放电还是蓝屏
本人使用操作系统windows 2000 PROFESSION .机子已经用了4年左右,没有换过硬件.能进入安全模式.
蓝屏出现提示信息如下:
*** stop:0x0000007f (0x00000008,0x00000000,0x00000000,0x00000000)
unexpected_kernel_mode_trap.
if this is the first time you've seen this stop error screen,restart your computer. if this screen appears again,follow these steps:
run a system diagnostic utility supplide by your hardware manufacturer .in particular,run a momory check,and check for faulty or mismatched memory.try changing video adapters.
disable or remove any newly installed hardware an dricers. disable or remove any newly installed software. if you need to use sage node to remove or disable components,restart your computer,pressF8 to select advanced stratup options ,snd then select soft mode.
refer to your geeting started manucal foe more information on tuoubles hooting shop errors.
请各位高手帮忙,急需要答案.由于光驱坏了,重装系统很是麻烦的.
内存条冲插,还是蓝屏
BIOS放电还是蓝屏
后面的提示没贴出来，看看是哪个文件的Crash.一启动就蓝一般是driver,找到之后进安全模式，删掉那个文件或者到注册表删掉那个驱动的注册
重装系统,不要怕麻烦.
可能是内存松动或坏了,你重新插一下内存试试.
本人也是有遇到过这种情况，是内存条的事，用稍硬的纸片擦擦，接口也是一样．再不行，可能就得换根．