明天交......专用名词可以乱翻译，意思差不多通顺就好！1w6字呢人多力量大帮帮忙......

来源：百度知道 编辑：UC知道 时间：2024/07/02 01:01:28
The results showed that the shape of belt wrapping arc was not co-axial with the pulley axis, and this was attributed to asymmetrical pulley deformation. In driven condition and driving with a small torque, the contact force distribution exhibited peaks at the inlet and outlet of the pulleys, as depicted by a representative example plot in Fig. 7 [39]. The peak on the outlet was higher, especially on the pulley with larger pitch radius. It was proposed that asymmetrical pulley deformation and self-locking of the belt on the pulley were responsible for the high peak at the outlet. The authors also observed that the high peak of the contact force at the outlet decreases as the driving torque increases. This was attributed to the increase in belt compressive force and the elimination of self-locking phenomenon of the belt.

1w6字呢人多力量大帮帮忙......翻译不完了....谢谢各位了
拜托了......一定要可以读...

结果表明,带包装的形状与弧形不是同轴滑轮,这是由于轴,不对称的滑轮变形。在驱动的条件,用一个小扭矩、接触力分布展出在进口和出口处标峰的滑轮,描绘了代表性情节图7(39)。山顶上的插座,尤其明显高于与较大的音高半径滑轮。有人提议不对称的滑轮的变形与锁上带滑轮的负责出口的高峰。作者还观察到的高峰的接触力均随驱动力矩有所增加。这是由于增加了带压和消除锁的现象。